Free Delivery On Orders Over £200
FREE Stove Fitting Consultation
Exclusive Ranges Available

Rais Q-Tee

Item in Stock | Usually dispatched within 24 hours
Loading...

This is RAIS’ small, functional and simple stove with Cubist appearance. Q-Tee II is suitable for lower heat requirement and limited spaces. Common sense and classic design. A cute stove that gives the room a soul. Q-Tee has an air-cooled handle and a grand closing system. It also has a shaking grate and an ash tray. You can choose the basic model and put it on the floor or on a plate, or highlight the stove by placing it on a bench or, for example, on a concrete base. Q-Tee is available in three heights: 57 cm, 65 cm and 85 cm. Available with an all-glass door or with a steel frame. The stove is available with top or rear outlet for the flue duct. Q-Tee can be ordered with AirSystem.

Technical Data

Dimensions (W-D-H)

  • External dimensions (W-D-H) in mm: 435 - 388 - 565/645/850
  • Combustion chamber inner dimensions (W-D-H) in mm: 317 - 270 - 270
  • Flue outlet (diameter): 150
  • Distance from centre to the back edge of the top plate in mm: 131
  • Distance from floor to the centre of the AirSystem connection: 105/185/390
  • Distance from floor to the centre of the flue outlet, top: 557/637/842

Output

  • Output (min-max) in kWh: 2 - 6
  • Heating (at -20°C) in m2: 30 - 90
  • Efficiency in %: 80%
  • Particulates in g/kg: 0,8
  • Weight
  • Weight in kg: 80/83/95

Distance to flammable material

  • To side wall in mm: 275
  • To back wall in mm: 350
  • Recommended distance in mm to non-flammable wall, sides and back: 50

Specifications

  • Steel door with glass: Standard
  • Glass door: Accessory
  • Flue outlet, top and back: Standard
  • Base: Accessory
  • Riddling grate and ash tray: Standard
  • AirSystem: Accessory


User/installation manual

Prøvningsattester.pdf
Declaration of Performance.pdf
  
Information for architects 
RAIS provides CAD drawings for professional use by architects and other professionals. To be able to use our drawings, you must have Autocad version 2000 or version 14 or similar software installed on your computer. 
Q-Tee 57 DXF.dxf
Q-Tee 65 DXF.dxf
Q-Tee 85 DXF.dxf
Q-Tee-65 DXF Sample.gif
Q-Tee-85 DXF Sample.gif
Q-Tee-57 DXF Sample.gif

 

Top